Contents
- STARGRASP Core System
- I. Core System Operation
- II. Core Software Overview
- Command Syntax Notes
- Application Notes
- A. Demo Scripts
- B. Toolkit Level
- C. STARGRASP C Libraries
- D. Controller Socket Commands
- adc
- celldes
- cellsel
- clean
- clk
- clvset
- console
- dac
- detsize
- dev
- etime
- etype
- expose
- exposing
- ifconfig
- leds
- ntp
- ot
- otacal
- pixtype
- reset
- readcal
- readout
- settrig
- shutter
- E. Registers and Clocking Instructions
- III. Core Hardware Overview
- IV. Computers and Switches
- V. Test Procedures
- STARGRASP Info-Sheet
- STARGRASP Quick Start
- Extra Software Provided (Unsupported)
Command: | readcal |
Contexts: | Network socket, serial console, stage2 only |
Function: | Calibrate signal chain to bring in range of the ADCs. |
Required Parameters: | None. |
Optional Parameters: | If adulevel omitted, readcal just measures pedestal. |
adulevel= | A number of counts, like 5000 |
channel= | [r] Select between red green and blue ADC channel |
cellrow= | (Use otacal command instead of readcal for OTAs) |
dev= | [current] Select dev 0 or 1 (>= r5696 stage2 ONLY) |
Attachments
- Offsetting_CAL_STARGRASP_CCD_case.png (69 kB) - , added by isani on Sat Sep 15 13:53:19 2012.